Tips To Prepare For a Lash Lift and Tint

Photo of author

By DonaldJennings

No matter if it is your first or twentieth time certified, lifting eyelashes vippeløft can sometimes be tricky! Are your lashes simply not forming correctly or do they lack definition? Sometimes the lash lift doesn’t work or its shields move around causing problems! Don’t fret though; we are here to assist!

Clean The Skin Thoroughly

Sebum oily skin? Make-up or dirt? All these elements can negatively influence how Lifted works! Furthermore, any residue or dirt on the eyes could prevent eyelids from forming their proper positions, so it’s crucial that any makeup or residue be cleared away using proteins remover pads prior to treatment and that lashes remain dry after patting with an ointment product.

Cut Your Shield

Sometimes a shield may be too large for its client’s eye. To address this, reduce its outer edges until it fits better; too small a shield may cause excessive curl, while too large won’t give enough. When selecting your ideal curl and length of natural lashes; consider our Lifted Curl Shields as they give maximum lifting effect and can work wonders with downward facing lashes!

Shield Positioning

Shield placement can make all the difference when it comes to creating an effective lift! Failing to do it properly could lead to less-than-successful results – ensure your eyelashes provide a stunning lift with proper shield placement!

Before applying the shield for lash lifting, carefully tape down each individual patient’s lashes onto an eyepad to give an unobstructed image of their line. By doing so, it will allow you to place the shield as close to your eye as possible – this will prevent their lashes from getting caught beneath it and remain undamaged by it.

Taping the Lid

Start by applying de-tacked tape like Micropore Tape over the eyelid, followed by placing your shield. This will prevent too much adhesive from getting on their skin and dislodging the shield during your procedure – shields stick better to tape than any other material, meaning no movement during or after. In addition, this saves time afterwards as tape removes adhesive off eyelids quickly! It’s an easy and quick tip that could save some precious seconds!

Lifting the Eyelids

Are You Working with Clients Who Suffer From Loose Skin Around Their Eyes
Here is a great hack that may help. Take Micropore tape, press it down along the lash line, lift one end and press gently upward. This will lift up their lids and increase their visibility. line of lash.

Give The Lashes the Correct Time to Process

Before beginning the procedure of lifting your eyelashes, you must evaluate them. Our lash lifting guidelines may be useful in following best practices when lifting clients’ lashes; if their eyelashes are damaged or coarse enough, however, additional timing changes may be needed in order to boost lift.

Product Placement

For optimal results, do not apply Steps 1-2 at the upper section of lashes. Applying them halfway down will produce amazing results and will avoid curly tips or overprocessed tips. Applying Step 1-2 halfway down will suffice and yield amazing results!

Apply The Minimum Amount of Adhesive

Adhesive is necessary to attach eyelashes and shields together, but too much could clump or create an obstruction for product to penetrate deeply within eyelashes. Apply only small amounts and gently pull your lashes over the shield – working in small sections with small amounts of adhesive is best.

Use Warmth to Help the Product Process

Cling film can help keep heat contained during this process and support its transport to its destination.

How to Do a Lash Lift?

Use the Correct Shield Size

When selecting the appropriate silicone shield size, it’s essential to take into account both the length and shape of your customer’s natural lashes as well as their eye shape (for this you have various types such as InLei Only and Only 1) as well as their desired look. To select an optimum size silicone shield lashes should cover 70% – 80% of it.

If your natural lashes cover less than 70% of your shield, select an appropriate size; if they exceed this threshold, opt for larger sizes instead. This will ensure that they fit securely on your shield without creating weird knots!

Lash Alignment

One of the key components in Lash Filler treatments is aligning lashes with silicon shields. Lifting each individual lash at an 90 degree angle before attaching them will affect their final look; taking your time when lifting will ensure optimal results. Use both Fillering Tool and Helper Tool together so you can isolate each individual eyelash for best results.

If you’re having difficulty aligning your eyelashes properly, start off by working on smaller ones first. This will give you plenty of time to lift them before the Fixing Gel sets hard and drys out. If the way your lashes appear lifted isn’t satisfactory for you, use a micro brush dipped in water or cotton buds to remove Fixing Gel from that particular spot and rectify as necessary before restarting! To remove excess glue before resuming!

Product Placement

For optimal lash laminate results, remember to be mindful when placing product! Applying too much product at once or failing to spread it evenly may alter the results and render them subpar. Don’t fear overdoing it as your lashes will absorb what they need; focus on accuracy in application and ensure all lashes are covered adequately; place the product near the root but not directly over the tips (ideally 1mm away) Cover up to 3/4 of length before applying anything directly over them as this could damage them and alter their final appearance!